With decades of experience in the supply of valve packages and our strong ties with numerous reputed valve makers, Fusion Engineering
Valves & Instrumentation Division are the ideal partners to meet all your valves and instrumentation needs.
Our team of trained engineers are capable of providing you the best solution at the most competitive prices and are able to assist our clients in the right selection of material and provide assistance in optimizing their requirements. Furthermore, Fusion Engineering, can provide you with bespoke solutions specific to your project requirements. In addition, Fusion Engineerings quality personnel monitor performance at our sub- vendors, conduct shop visits to ascertain progress of orders and employ a strict quality procedure to ensure that our sub-vendors meet or exceed our clients requirements and our own. Drawings and documentation are always prepared and/or reviewed by our project team to ensure compliance with our client’s requirements.
In addition to the supply of valves and instrumentation, Fusion Engineering are also capable of providing Logistics support, stocking facilities and material management. Our stock yards are capable of handling large quantities of valves stocks, and include personnel trained to perform periodic preventive maintenance, re-tests and recertification. Our Valve Actuation Center can also provide automation services, repairs, refurbishment etc., to meet the requirements of our clients.
Our range of products include but are not limited to:
- Gate Valves (Flex Wedge, Through Conduit, Slab, Parallel Slide, PSB, Bellow Sealed, Knife etc.)
- Butterfly Valves (Concentric, Double Offset, Triple Offset, Double Block and Bleed)
- Ball Valves (Trunnion, Floating, Full Welded, Top Entry, Side Entry, DBB, 3-way, 4-way, etc.)
- Plug Valves (Lubricated, Non Lubricated, Non-Lubricated Metal Seated, DBB, Lined etc.)
- Globe valves
- Check Valves ( Piston, Swing, Dual plate, Nozzle, Tilting Disc, Counter-weight etc.)
- Strainers (Y-Type, Conical, Basket)
- Sampling Valves
- Control Valves
- Steam traps, Manifolds, Steam management equipment & Humidifiers
- Actuators (Pneumatic, Electric, Gas Over Oil, Hydraulic, Electro-Hydraulic etc.)
- Interlocking Devices
- Instrumentation (Pressure, Temperature, Level & Flow )
Gate Valves
- Wedge
- Penstock / Sluice
- Through conduit
Globe Valves
- Piston
- Ball
- Swivel disc
Check Valves
- Swing
- Axial flow / Nozzle
- Wafer
- Spring return
Ball Valves
- Floating
- Trunnion Mounted
- Soft & Metal seated
Plug Valves
- Sleeved
- Lubricated
Butterfly Valves
- Concentric rubber lined
- Double/Triple offset
Choke Valves
- Positive Inline
- Adjustable
Double Block & Bleed Valves
- Ball valve design
- Butterfly valve design
- Twin seal plug valve design
Control Valves
Pressure Reducing Valves
Safety Relief Valves
Piston Valves
Crown Valves
Pressure Vacuum Relief Valves
Tank Blanketing Valves
Breather Valves
Diaphragm Valves
PFA/PTFE Lined Valves
Valve Locking Devices
Ball Valves
Design standards: API 6D; API 608; BS 5351 Sizes: 1/4” nb to 56”nb
Floating or Trunnion-mounted
Firesafe to API 607; API 6FA and BS 6755-2 / ISO 10497-2
Full or Reduced Bore
Construction: 1,2 or 3 Piece; Welded; Top-Entry Design to ANSI B16.34
Operation by Manual hand wheel/Gearbox or Actuation Double Block & Bleed; Emergency Shut Down
Sub-Sea API 6D SS
Multiple Trims & Pressure Ratings Soft or Metal seated
Cryogenic
Extended Stem for Buried Service Jacketed
NACE MR-01-75
End Connections: Flanged; Butt Weld; Hub-Ends; Socket Weld Threaded
Forged or Cast Construction- Carbon, Stainless & High Alloy
Operation by Manual, Hand Wheel/Gearbox or Actuation
Desalination/Reverse Osmosis Applications Pressure Ratings to Class 900lbs
Gate Valves
Design Standards: API 6D, API 600, API 602, BS1414
Sizes: 1/4″- 72“
Closure: Screwed NPT/SW/BW/Flanged RF & RTJ Merla ACV Series
Adjustable Choke Valve
Merla positive Inline Choke Valve High Pressure Adjustable Choke Valve Motor Flow Control Valves
Plug Valves
Design Standards: API 599;API 6D
Sizes: 1/2”nb to 14”nb
Lubricated or Sleeved
Butterfly Valves
Design Standards: API 609; MSS SP 67; MSS SP-68
Sizes: 1/2”nb to 72”nb
Multiple Trims & Pressure Ratings
Sealing by Lining or Seats
Soft and Metal Seated
Double or Triple Eccentric
End Connections: Wafer; Wafer Lugged; Butt Weld; Flanged
Wafer & Swing Check Valves
Design standards: BS 5352; API 6D; API 594
Sizes: 1/4”nb to 48”n
Closure: Piston; Ball; Swing; Lift; Tilting Disc; Single & Double Disc Wafer-type
Globe Valves
Design Standards: BS 5352; BS 1873
Sizes: 1/4”nb to 18”nb
Configuration: Straight, Angle, and Y-Type
Parameters for Check, Globe and Gate Valves:
- Multiple Trims & Pressure Ratings
- Cryogenic
- NACE MR-01-75
- End Connections: Flanged; Butt Weld; Socket weld; Threaded
- Forged or Cast Construction
- Bonnet: Bolted; Pressure Sealed; Welded
Cryogenic Gate valves
- Liquefied Gas & liquefied LNG
- Flanged or welded connection
- Range of working temperature -196°C to + 538°C
- Class 150-1500, NPS 2”-12”
- Unreduced flow
- Non-turning stem & bolted body-bonnet joint
Operations
- Hand wheel
- Hand wheel with gearing
- Electrical actuator
Cryogenic Ball valves
- Floating or trunnion mounted
- Liquid nitrogen, oxygen and LNG
- Flanged or welded connection
- Range of working temperature -30°C to - 196°C
- Class 150-900, NPS 2”-30”
- KEL-F seals and seats or inserts guarantee the best performance in cold conditions
- Equipped with anti-blow stem and antistatic device
Operations
- Pneumatic actuator
- Hand wheel with gear box
- Electrical actuator
Globe & Butterfly valves also available