Wheel Fenders
OEM manufacturer for Various Infrastructure clients . Wheel fenders are widely used on marine environments with exposed corners to help ships maneuver into berths and narrow channels such as locks and dry-dock entrances. The main axle slides on bearings and the wheel reacts against back rollers to provide high energy and minimal rolling resistance, whilst the stainless steel and composite Orkot ® bearings are almost zero maintenance.
Roller Fenders
OEM manufacturer for Various Infrastructure clients. Roller Fenders are usually installed to guide ships in restricted spaces like walls of dry docks. They can also be used on corners and lock entrances where lower energies are needed. Roller Fenders use stainless steel and composite Orkot® bearings which give a very low rolling resistance and require virtually zero maintenance.
Fender Panels
Fender panels are just as important as the rubber units on high-performance systems. That’s why every panel can be purpose designed using structural analysis programs and 3D CAD modeling for optimum strength. Fender panels distribute reaction forces to provide low hull pressures and cope with large tidal variations. They can also be designed to resist line loads from belted ships, or even point loads in special cases. Optional lead-in bevels reduce the snagging risk, whilst brackets (where required) provide highly secure connection points for chains. Closed box designs are used almost exclusively – all fully sealed and pressure checked. Corrosion protection is provided by high durability C5M class paint systems to ISO 12944, and additional corrosion allowances can be designed where required.
UHMW-PE PADS
Ultra-High Molecular Weight polyethylene (UHMW-PE) is the first choice material for facing steel fender panels and other heavy duty applications. It combines very low friction with excellent impact strength and a wear resistance much better than steel.
The standard color is black, but if other colors are needed then ‘virgin’ grade also comes in yellow, white, grey, blue, green and red. UHMW-PE materials are compounded to resist ozone and UV radiation. They do not degrade or rot and are easily recycled at the end of their useful service life.
Anchors & Fasteners
Anchors are used to install fender systems with berthing structures. We manufacture Custom made Anchors and Fasteners made from various corrosion resistance materials as below.
- Galvanized Carbon Steel
- SS 316
- SS 316L
- SS 316 S33
- Duplex SS (UNS S31803 & S32205)
- Super Duplex SS (UNS S32750 &UNS S32760)
Ladders Fabrication
As OEM, We manufacture Custom made Marine Ladders from various corrosion resistance materials as below, Ladders are available with Various corrosion resistance coatings like Glass Flake epoxy, Coal Tar Epoxy with coating thickness more than 1000 Microns and some cases supplied with Rubber Lining / Rubber Ladders, Polyurethane Ladders . Our ladders are very robust but remain flexible to reduce accident damage and help protect the wharf when small crafts berth.
- Galvanized Carbon Steel
- SS 316
- SS 316L
- SS 316 S33
- Duplex SS (UNS S31803 & S32205)
- Super Duplex SS (UNS S32750 &UNS S32760)
Chains, Tensioners and Shackles
Supply of complete Chain systems, Which are essential in controlling the deflection of fenders and its proper functioning under different loading conditions. Chains, Tensioners and Shackles are Manufactured using various materials as below and with Various corrosion resistance coatings like Glass Flake epoxy, Coal Tar Epoxy with coating thickness more than 1000 Microns.
- Galvanized Carbon Steel
- SS 316
- SS 316L
- SS 316 S33
- Duplex SS (UNS S31803 & S32205)
- Super Duplex SS (UNS S32750 &UNS S32760)